Fibaro Motion Sensor

Current Stock:


The FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion, the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is a battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the range of the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.


Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher).
Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
Battery powered.
Detects motion using a passive IR sensor.
Measures the temperature.
Measures the light intensity.
Easy installation on a wall or any surface.
Theft and tampering protection – once vibrations are detected, a notification is sent to the main controller.
Detected movement, temperature and vibrations are signalled by the built-in LED diode.
Detects vibrations.
Built-in accelerometer allows it to measure orientation in space.
This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Motion Sensor with firmware 3.2 or higher is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical data

Power supply: CR123A battery, 3.0V DC
Recommended installation height: 2.4 m
Light intensity measuring range: 0 – 32000 lux
Operational temperature: 0°C to 40°C
Measured temperature range: -20°C to 100°C
Temperature measuring accuracy: 0.5°C (within 0 – 40°C range)
Radio protocol: Z-Wave, Z-Wave+ (firmware 3.2 or higher)
Radio frequency: 921.42 MHz
Range: up to 40 m indoors (firmware 3.2 or higher)

Download Operating Manual (966Kb)

View product video