The FIBARO Door/Window Sensor is a wireless, battery powered reed sensor compatible with the Z-Wave standard. Changing the device’s status will automatically send a signal to the Z-Wave controller and associated devices. The sensor can be used to trigger scenes and can be used anywhere that there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet. In addition the FIBARO Door/Window Sensor supports one DS18B20 temperature sensor and has one potential free input.
Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher) Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher). Works with other Z-Wave network devices, but as a battery device doesn’t take part in signal routing Door/window opening is detected through Sensor’s body and a magnet separation Easily mounted on doors, windows, garage doors and gates The device status is signalled by an LED diode Compatible with DS18B20 temperature sensor Possibility of connecting the switch to potential-free input This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers
Power supply: ER14250 (1/2AA) 3.6V DC battery Inputs: single, potential-free (IN) Supported temperature sensor: single, DS18B20 Operational temperature: 0°C to 40°C Radio protocol: Z-Wave. Z-Wave+ (firmware 3.2 or higher) Radio frequency: 921.42 MHz Range: to 40 m indoors (firmware 3.2 or higher) Dimensions (L x W x H): 76 x 17 x 19 mm