Fibaro Smart Implant (Binary Sensor)

FIBARO
$86.00
$78.00
Be the first to leave a review
Current Stock:
1
SKU:
FGBS-222

Create Wishlist

Description

 

FIBARO Smart Implant enhances the functionality of wired sensors and other devices by adding Z-Wave network communication.

You can connect binary sensors, analogue sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensors to report their readings to the Z-Wave controller.

It can also control devices by opening/closing output contacts independently of the inputs.

Features

 

  • Compatible with any certified Z-Wave or Z-Wave Plus controller.
  • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
  • Works as a Z-Wave signal repeater.
  • Allows for connecting sensors: Built-in temperature sensor.
    • 6 x DS18B20 sensors,
    • 1 x DHT sensor,
    • 2 x 2-wire analogue sensor,
    • 2 x 3-wire analogue sensor,
    • 2 x binary sensors.

 

Technical Specifications

Power supply 9-30V DC ±10%
Inputs 2 0-10V or digital inputs
1 serial 1-wire input
Outputs 2 potential-free outputs
Supported digital sensors 6 DS18B20 or 1 DHT22
Maximum current on outputs 150mA
Maximum voltage on outputs 30V DC / 20V AC ±5%
Built-in temperature sensor measurement range -55°C–126°C
(-67°F–259°F)
Operating temperature 0–40°C (32–104°F)
Radio protocol Z-Wave (500 series chip)
Radio frequency 921.42 MHz ANZ
Radio transmit power max. 7 dBm (EIRP)
Range up to 50m (164 ft) outdoors
up to 40m (131 ft) indoors
(depending on terrain and building structure)
Dimensions
(Length x Width x Height)		 29 x 18 x 13 mm
(1.14” x 0.71” x 0.51”)
Compliance with EU directives RoHS 2011/65/EU
RED 2014/53/EU