The FIBARO Universal Binary Sensor is a wireless module which improves the functionality of any wired sensor with a binary output, by adding Z-Wave network communication. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. It can service up to two binary sensors and up to four temperature sensors. The device is designed to be installed in the housing of a sensor or another device, whenever wireless collection of data from the wired sensors is required.
Compatible with any Z-Wave Controller Advanced microprocessor control Compatible with regular and parametric alarm lines (can be connected to 2 alarm detectors) Compatible with binary sensors (can be connected to 2 binary outputs) Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors) This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.
Power supply: 9-30V DC ±10% Inputs: 2 potential-free inputs. 1 digital input, 1-wire input Outputs: 2 potential-free outputs Maximum current carrying capacity of outputs: 150mA Maximum voltage at output contacts: 36V DC / 24V AC ±5% Measurement range: -55°C – +126°C Operational temperature: 0-40°C Supported temperature sensors: up to 4 DS18B20 sensors Radio protocol: Z-Wave Radio signal power: up to 1mW Radio frequency: 928.42 MHz Range: up to 50 m outdoors, up to 30 m indoors (depending on building materials) Dimensions: (L x W x H)): 27.3 x 14.5 x 12 mm