Fibaro Smoke Sensor

Contact us for pricing
Current Stock:


The FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. The fire alarm is signalled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is a programmable indicator of exceeding a pre-set temperature level.
The FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. The visual indicator signals fire, operating mode and is used to see if the device is within range of the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapour).


Compatible with any Z-Wave or Z-Wave+ Controller
Supports protected mode (Z-Wave network security mode) with AES-128 encryption
Extremely easy installation – simply install it in location prone to fire
Battery powered
3 levels of sensor sensitivity
Built-in tamper / opening detector
Alarm is signalled by sound, visual indicator and Z-Wave control command
Programmable excess temperature warning
Automatic test performed every 10 seconds
This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.

Technical data

Technical data for firmware 3.1 - 3.3
Power supply: CR123A battery, 3.0V DC
Operational temperature: 0°C to 55°C
Operational humidity: 0% to 93%
Measured temperature range: -20°C to 100°C
Temperature measuring accuracy: 0.5°C (within 0-55°C range)
Radio protocol: Z-Wave
Radio frequency: 921.42 Mhz
Range: up to 50m outdoors, up to 30m indoors (depending on terrain and building structure)
Dimensions (diameter x height): 65 x 28 mm

Download Operating Manual (566Kb)