Aeotec Wall Mote Quad

Aeotec
$109.00
Current Stock:
0
SKU:
ZW130

Currently out of stock. Please contact us to place an order.

On any wall.

WallMote is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

Simple to install.

WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.
1. Attach the mounting plate. WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
2. Attach WallMote. Simply place it in front of the mounting plate and it will magnetically attach.

Control on tap.

Control one Z-Wave device. Control many. And all with a single tap.
There is simplicity in tapping touch glass - smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.
Tap. Control.

Wireless switch.

To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres.

Secure switch.

Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.

Subtle switch.

Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep

Simple recharging.

Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.

Haptic feedback.

It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote’s touch glass. But you will feel the change. WallMote’s haptic engine confirms your every action via a click sensation.

Technical Specifications

 

RF Protocol
Z‐Wave Plus (500 series chip)
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐Wave
Z‐Wave device type
Multilevel controller
Power
Rechargeable Lithium-ion
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
‐10 ~ 80 °C
Color
White
Weight
100g
Housing
ABS
Dimensions
(LxWxH) 72mm x 72mm x 9mm
Compliance
Z-Wave Plus certified
Warranty 12 Months